Ridha Djebali

• Full Professor in Physics
• HDR / PhD Dr / M Sc / Eng.
• Head of research unit UR22ES12: Modeling Optimization and Augmented Engineering
• Ex-director of ISLAIB higher Institute, University of Jendouba, Beja 9000, Tunisia
• Email: ridha[dot]djebali[at]ipein[dot]rnu[dot]tn

2025

85.  

83. R. Djebali et al., Performance Optimization of a Diesel Generator Running on Microwave-Assisted Ternary Biodiesel Blends: Insights from Response Surface Methodology. Submitted.

82.  Mokhtar Ferhi, Bouchmel Mliki, Rached Miri, R. Djebali, Mohamed Ammar Abbassi, Box-Behnken Design of Experiments optimization of energy transfer rate and thermodynamic irreversibility through a micro-heat-exchanger cooled by jets nanofluid flow,  submitted.

81. M. Ferhi and R. Djebali, "Lattice Boltzmann investigation of fluid flow and heat transfer in a micro-exchanger linearly heated from his horizontal walls" Accepted in Journal of Engineering physics and Thermophysics.

80. Mokhtar Ferhi and R. Djebali, Lattice Boltzmann Analysis of Heat, Mass Transfer and Entropy Generation on MHD Double Diffusive Convective Nanofluid Through a Corners Heated Cavity Containing Refrigerant Solids, Journal of Nannofluids, Accepted.

79. Afaynou Ibtissam, Faraji Hamza, Choukairy Khadija, R. Djebali, Rezk Hegazy, Comprehensive analysis and thermo-economic optimization of a hybrid phase change material-based heat sink for electronics cooling. Heat Transfer Journal. 2025; 1–21, https://doi.org/10.1002/htj.23382
78.  Marwen Bjaoui, Benoît Larroque, R. Djebali, Lotfi khemissi, Robert Ruscassié, Ridha Benadli, Franck Luthon, Anis Sellami, Three-Phase PV Pumping System with Advanced Control for Enhanced Efficiency and Robustness: Modeling, Experimental Validation and Optimization. International Journal of Circuit Theory and Applications. 2025, http://doi.org/10.1002/cta.4573 

77.  Abdelmalek Kriba, Farid Mechighel, R. Djebali, Ali Jawad Chamkha. DoE Optimization of Applied Pressure and Mold Size in Manufacturing Homogeneous Alumina Samples by SPS Process under 1000A Current. Journal of Applied and Computational Mechanics, 2025, DOI: 10.22055/jacm.2025.48063.4953
76.  R. Djebali, Bernard Pateyron, Mokhtar Ferhi, Mohamed Ouerhani, Karim Khemiri, Montassar Najari, Mohamed A. Abbassi, Chohdi Amri, Ridha Ennetta, Driss Zied.Artificial Neural Networks for Optimizing Alumina (Al₂O₃) Particle and Droplet Behavior in 12 kK Ar-H₂ Atmospheric Plasma Spraying. Frontiers in Heat and Mass Transfer, Vol.23, No.2, pp. 441-461, 2025, DOI:10.32604/fhmt.2025.063375
75. F. Mebarek-Oudina, M. Bouselsal, R. Djebali, H. Vaidya, N. Biswas and K. Ramesh; Thermal performance of MgO-SWCNT/water hybrid nanofluids in a zigzag walled cavity with differently shaped obstacles. Modern Physics Letters B, 2550163, 2025  DOI: 10.1142/S0217984925501635
74. Hasna Abid; R. Djebali; Hamza Faraji; Mariem Lajnef; Zied Driss; Jamel Bessrour. "Impact of Geometrical Parameters on Indoor Environments with Single-Sided Ventilation: Experimental and Numerical Study". Journal of Applied and Computational Mechanics,11(1) (2025) 12-22 DOI: 10.22055/jacm.2024.45856.4423 Q2
73. R. Djebali, M. Ferhi, F. Mechighel, K. Khemiri, M. Bjaoui, M. Ouerhani, M. Najari, C. Amri, R. Enneta, "Deep Learning Analysis and Numerical Simulation of Exergy and Nanofluid Heat Transfer Efficiency in a Two-Compartment Heat Exchanger with Internal Heat Generation and Baffles," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-6, doi: 10.1109/IREC64614.2025.10926804. 
72. R. Djebali, M. Ferhi, K. Khemiri, F. Mechighel, B. Pateyron, M. Ouerhani, M. Najari, C. Amri, R. Enneta, "Integration of Artificial Neural Networks and Process Simulation for Optimizing Direct Current Atmospheric Plasma Spraying of Enhanced Zirconia Coatings," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-6, doi: 10.1109/IREC64614.2025.10926821.
71. K. Khemiri, M. Najari, M. Ferhi, R. Djebali and M. Bjaoui, "Enhancing State of Charge Estimation for Lithium-Ion Batteries in Noisy Environments Using a Hybrid LSTM-EKF Mode," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-4, doi: 10.1109/IREC64614.2025.10926811. 
70. K. Khemiri, M. Najari, M. Ferhi, R. Djebali and M. Bjaoui, "Analyzing Series Resistance Effects on PV Characteristics and Estimation Using LSTM-EKF," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-4, doi: 10.1109/IREC64614.2025.10926737. 
69. M. Ferhi, K. Khemiri, M. Najari and R. Djebali, "Design of Experiments for Heat Transfer Phenomena and Entropy Generation in Thermal Management of Electronic Components," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-6, doi: 10.1109/IREC64614.2025.10926743.
68. M. Ferhi, K. Khemiri, M. Najari and R. Djebali, "Heatline Visualization and Entropy Analysis of MHD Conjugate Heat Transfer in a Partitioned Medium Filled with (15%Ag-85%MgO)/H20 Nanofluid: A Lattice Boltzmann Investigation," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-6, doi: 10.1109/IREC64614.2025.10926791. 
67. M. Bjaoui, K. Khemiri, L. Khemissi, R. Djebali and A. Sellami, "Optimized Energy Management Strategy for Non-Autonomous Microgrids Using Crow Search Optimization," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-6, doi: 10.1109/IREC64614.2025.10926810. 
66. M. Asma, M. Ferhi, R. Djebali, K. Khemiri and M. Najari, "Fluid-structure interaction over a backward-facing step equipped with an elastic baffle," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-4, doi: 10.1109/IREC64614.2025.10926781. 
65. F. Chebli, F. Mechighel and R. Djebali, "Numerical Investigation of the Effect of Storage Tank Orientation on the Melting of Phase Change Material in a Square-Shaped Tank," 2025 15th International Renewable Energy Congress (IREC), Hammamet, Tunisia, 2025, pp. 1-6, doi: 10.1109/IREC64614.2025.10926824.

2024

64. Hasna Abid, R. Djebali, Hamza Faraji, Mariem Lajnef, Zied Driss and Jamel Bessrour “Numerical and experimental investigation of inlet velocity influence on airflow characteristics for indoor thermal comfort” Accepted in Scientia Iranica Journal. DOI: 10.24200/sci.2024.63501.8436 Q2

63. R. Miri, B. Mliki, L. Ayed, M.A. Abbassi, R. Djebali and A. Hidouri; Numerical study of Magnetohydrodynamic forced convective nanoliquid flow through a channel with backward facing step and three hot cylinder blocks; Journal of Nanofluids, 13, 889–906 (2024). Q2

62. M. Ferhi and R. Djebali, Optimized Model for Heat Transfer and Entropy Generation in Micro-Heat Exchanger Induced by Walls Injection Using Design of Experiments. Romanian Journal of Physics 69, 608 (2024) DOI: https://doi.org/10.59277/RomJPhys.2024.69.608.  Q2

61. Wiem Nasri; R. Djebali; Ali J. Chamkha; Abderrezak Bezazi; Farid Mechighel; Paulo Reis; Zied Driss. Thermal behavior of mesoporous Aramid fiber reinforced silica aerogel composite for thermal insulation applications: microscale modeling. Journal of Applied and Computational Mechanics, 10(1), January 2024, pp. 140-151. doi: 10.22055/jacm.2023.44601.4247 Q2

60. Mokhtar Ferhi, Sameh Abidi, R. Djebali, Fateh Mebarek-Oudina; Assessment of micro-scale heat exchangers efficiency using lattice Boltzmann method and design of experiments; Energy and Built Environment; 5(6), Pages 840-852, https://doi.org/10.1016/j.enbenv.2023.06.011 Q1

2023

59. R. Djebali, D. Khilifi and M. Ferhi, "Design of Experiments Investigation of Synthetic Jets Cooling Efficiency," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389495. https://ieeexplore.ieee.org/document/10389495

58. M. Ferhi, D. Khilifi and R. Djebali, "Heat Transfer and Irreversibility Response Due to Natural Convection in a Micro Partially Porous Cavity: Micro-Electronic Cooling Application," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389492. https://ieeexplore.ieee.org/document/10389492

57. M. Ferhi, D. Khilifi and R. Djebali, "Micro Scale Modeling of Heat Transfer and Entropy Generation in a Partially Porous Channel Using Lattice Boltzmann Method and Design of Experiments," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389319. https://ieeexplore.ieee.org/document/10389319

56. R. Djebali, M. Ferhi and D. Khilifi, "Computational and DOE Assessment of Heat Transfer and Thermodynamic Second Law in Closed Medium with Internal Fan," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389292. https://ieeexplore.ieee.org/document/10389292

55. Nasri, W.; Driss, Z.; R. Djebali; Lee, K.-Y.; Park, H.-H.; Bezazi, A.; Reis, P.N.B. Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling. Materials 2023, 16, 7233. https://doi.org/10.3390/ma16227233 Q2

54. B. Mliki, R. Miri, R. Djebali and M.A. Abbassi; CuO -water MHD mixed convection analysis and entropy generation minimization in double lid-driven U-shaped enclosure with discrete heating. Acta Mechanica et Automatica. 2023; 17(1):1-12, DOI 10.2478/ama-2023-0013. Q3

2022

53. R. Djebali and M. Ferhi, Appraising heat transfer enhancement by nanofluid and entropy generation minimization in a micro tall cavity: Magnetic field and sinusoidal heating effects, 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1-4, doi: 10.1109/IREC56325.2022.10002078.

52. R. Djebali and M. Ferhi, DOE of heat transfer and entropy generation in channel microheat exchanger driven by a coflow, 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1-5, doi: 10.1109/IREC56325.2022.10001923.

51. R. Miri, M. A. Abbassi, M. Ferhi and R. Djebali, Entropy generation of MHD forced convection nanoliquid in a channel containing three cylinder blocks, 2022 13th International Renewable Energy Congress (IREC), 2022, pp. 1-5, doi: 10.1109/IREC56325.2022.10002020.

50. R. Miri, M.A. Abbassi, M. Ferhi and R. Djebali; Second Law Analysis of MHD Forced Convective Nanoliquid Flow Through a Two-Dimensional Channel. Acta Mechanica et Automatica. 2022; 16(4): 417-431. https://doi.org/10.2478/ama-2022-0050

49. M. Ferhi, R. Djebali, S. Abboudi and W. Alkouz. MHD convective nanofluid flow, heat transfer and irreversibility analysis in a horizontal micro tall cavity with heat sources in the slip regime. Journal of Nanofluids, Volume 11(4), 510-527 (2022).

48. M. Ferhi and R. Djebali, Heat Transfer Appraising and Second Law Analysis of Cu-Water Nanoliquid Filled Microchannel: Slip Flow Regime. Romanian Journal of Physics 67, 605 (2022) 

47.M. Ferhi, R. Djebali, F. Mebarek-Oudina, N. H. Abu-Hamdeh, S. Abboudi, MHD Free Convection Through Entropy Generation Scrutiny of Eco-Friendly Nanoliquid in a Divided L-Shaped Heat Exchanger with LBM Simulation, Journal of Nanofluids, 11 (1), 99–112 (2022).

2021

46.  M. Ferhi, R. Djebali, W. Al‐Kouz, S Abboudi, AJ Chamkha. MHD conjugate heat transfer and entropy generation analysis of MWCNT/water nanofluid in a partially heated divided medium. Heat Transfer-Asian Research. 2021, 50(1), pp. 126–144. https://doi.org/10.1002/htj.22007.

45. R. Djebali, F. Mebarek-Oudina, R. Choudhari, Similarity solution analysis of dynamic and thermal boundary layers: further formulation along a vertical flat plate. Phys. Scr. 96(8), 085206, 2021, DOI: 10.1088/1402-4896/abfe31

44. R. Djebali, Mesoscopic study of mixed convection and heat transfer due to crescent shape hot ‎source under magnetic field and Joule effect, Romanian Reports in Physics, 73(1), 106 (2021).

2020

43. R. Djebali, Efficient 2nd Order Taylor Series Expansion Model to Integrate Stiff and Non-Linear ODEs: Comparison to Rk45-Type Integrators. Glob J Eng Sci. 6(5):1-7, 2020. GJES.MS.ID.000647. DOI: 10.33552/G JES.2020.06.000647.

42. R. Djebali, Numerical Analysis of Nanofluid Cooling Efficiency of Hot Multishaped Cylinder in Vertical Porous Channel, Romanian Journal of Physics , 2020, 65(9-10), pp. 1–10, 122. 

41. M. Ferhi, R Djebali, Appraising conjugate heat transfer, heatlines visualization and entropy generation of Ag-MgO/H2O hybrid nanofluid in a partitioned medium, International Journal of Numerical Methods for Heat and Fluid Flow. 30(10), pp. 4529-4562 (2020). https://doi.org/10.1108/HFF-10-2019-0749.

40. R. Djebali, A. Jaouabi, T. Naffouti & S. Abboudi, Accurate LBM appraising of pin-fins heat dissipation performance and entropy generation in enclosures as application to power electronic cooling, International Journal of Numerical Methods for Heat and Fluid Flow .  30(2), 742-768, 2019.

2019

39. M. Ferhi, R Djebali, Abboudi S. & H Kharroubi, Conjugate natural heat transfer scrutiny in differentially heated cavity partitioned with a conducting solid using the lattice Boltzmann method, Journal of Thermal Anlysis and Calorimetry , 138, 3065-3088, 2019.

38.  M. Ferhi, R Djebali, A Said, Conjugate naturalc onvection in a partitioned square cavity filled with Al2O3-Water nanofluid based on experimentalc orrelations: a Lattice Boltzmann investigation. CFD Letters, 11(3), 1-27, 2019.
37.  W. Nasri, R Djebali, Marjan, G., Mohamed Ammar, A., & Said, A.. Apple Convective Drying - Part I: Finite Elements Parametric Study for Appraising the Operating Conditions Effects. CFD Letters, 11(3), 28-41, 2019.
36.  W. Nasri, R Djebali, Marjan, G., Mohamed Ammar, A., & Said, A., Apple Convective Drying - Part II: Scrutinization of Monitoring Parameters Levels via Taguchi Optimization Approach. CFD Letters, 11(3), 42-54, 2019.
35.  I. Boumrar, R Djebali, Experimental Validation of Pressure Distribution Prediction under Delta Wing Apex Vortex at High Reynolds Numbers. CFD Letters, 11(3), 92-102, 2019.
34.  R Djebali, Said, A., & M.A. Abbassi (2019). Transition Thresholds and Routes to Unsteadiness of Magneto-Convective Flows in Tall Cavities at Low-Prandtl Number Fluids. CFD Letters, 11(3), 55-71.

قال الرسول الكريم عليه الصلاة والسلام:{من أحب أن تسره صحيفته فليكثر من الاستغفار}.

وقال عليه الصلاة والسلام :{ينزل ربنا تبارك وتعالى كل ليلة إلى السماء الدنيا حين يبقى الثلث الأخير من الليل الآخر فيقول :من يدعوني فأستجب له، من يسألني فأعطيه، من يستغفرني فأغفر له؟

وقال الحبيب عليه الصلاة وللسلام: {إن الله يبسط يده بالليل ليتوب مسئ النهار ويبسط يده النهار ليتوب مسئ الليل، حتى تطلع الشمس من مغاربها}.

و قال رسول الله صلي الله عليه وسلم "سيد الاستغفار أن يقول: اللهم أنت ربي لا إله إلا أنت خلقتني و أنا عبدك وأنا على عهدك ووعدك ما استطعت، أعوذ بك من شر ما صنعت، أبوء لك بنعمتك على و أبوء لك بذنبي فاغفر لي فإنه لا يغفر الذنوب إلا أنت " قال ومن قالها من النهار موقناً بها فمات من يومه قبل أن يُمسِ فهو من أهل الجنة، ومن قالها من الليل وهو موقن بها فمات قبل أن يصبح فهو من أهل الجنة" رواه البخاري.

قال لقمآن لابنه: {يا بنيّ, أكثر من الإستغفآر, فإنّ لله نفحآت لآ ينآلها إلا مستغفر}.

قال عـمر بـن الخـطآب، رضـــى الله عنه: {لو نـــزلت صآعقـــة من السمــــآء مآ أصـــآبت مستغفـــر}.

قال علي بن أبي طالب، رضـــى الله عنه: {ما ألهم الله سبحانه عبدا الاستغفار وهو يريد ان أن يعذبه}.

اللهم إني أتوسل بك إليك؛ وأقسم بك عليك؛ فكما كنت دليلي إليك، كن اللهم شفيعي لديك؛ وعاملني بالإحسان لا بالميزان و بالفضل لا بالعدل فإن حسناتي منك و سيئاتي مني، فجد اللهم بما هو منك على ما هو مني. آمين.

قال الله تعالى {وسارعوا إلى مغفرة من ربكم وجنة عرضها السماوات والأرض أعدت للمتقين الذين ينفقون في السراء والضراء والكاظمين الغيظ والعافين عن الناس والله يحب المحسنين}. صدق الله العظيم

قال الله تعالى {وإنك لعلى خلق عظيم}.

و سئل صلى الله عليه وسلم{ما خير ما أعطي الإنسان ؟ قال: خلق حسن}.

و قال الصحابة لرسول الله صلى الله عليه وسلم يسألونه: يا رسول الله من أحب عباد الله إلى الله ؟ قال: {أحسنهم خلقا}.

و قال عليه الصلاة والسلام: {إن المؤمن ليدرك بحسن خلقه درجات الصائم القائم}.رواه أبو داود.

و قال عليه الصلاة والسلام: {وما من شئ أثقل في ميزان المؤمن يوم القيامة من خلقٍ حسن}.

و قال عليه الصلاة والسلام: {فأكثر ما يدخل الناس الجنة تقوى الله وحسن الخلق}. صححه الترمذي وقال غريب.

و قال عليه الصلاة والسلام: {إن من أحبكم إلى وأقربكم مني مجلسا يوم القيامة، أحاسنكم أخلاقا}. حسنّه الترمذي.

و قال: صلى الله عليه و سلم {خيركم خيركم لأهله؛ وأنا خيركم لأهلي}.

و من حسن الخلق معاشرة الزوجة بالإكرام والإحترام، و بشاشة الوجه وطيب الكلام.

قال الحبيب عليه الصلاة والسلام: {كل أمر ذي بال لا يبدأ فيه ببسم الله الرحمن الرحيم ، وبالحمد لله ، أو بحمد الله أو بذكر الله ، فهو أجذم أو أقطع أو أبتر}.

2018

33.  R. Djebali. Lattice Boltzmann Method Computation of Turbulent High-Temperature Plasma Jets. Glob J Eng Sci.  1(1): 2018. GJES.MS.ID.000503.

32.  MA Abbassi, MR Safaei, R Djebali ,K Guedri, B Zeghmati , AA.A.A. Alrashed, LBM simulation of free convectionin a nanofluid filled incinerator containing a hot block, International Journal of Mechanical Sciences , 144, pp. 172-185, 2018.

31. M.A. Abbassi, R. Djebali and K. Geudri; Effects of heater dimensions on nanofluid natural convection in a heated incinerator shaped cavity containing a heated block; Journal of thermal Engineering, 4(3), pp.2018-2036, 2018.

30.  R. Djebali, M.A. Abbassi, A. Jaouabi; Lattice Boltzmann Method for the Simulation of Flows and Transfers at Very High-Temperature: A Dynamic Framework of Conversion to Physical Space with Test Cases; Springer Book "Thermo-Mechanics Applications and Engineering Technology," chap.7, pp.151-169, 2018.

2017

29. M.A. Abbassi, B. Mliki and R. Djebali; Lattice Boltzmann Method for simulation of nanoparticle Brownian motion and magnetic field effects on free convection ina nanofluid-filled open cavity with heat generation/absorption and non uniform heating on the left solid vertical wall;  Fluid dynamics & Materials Processing, 13(2), pp.59-83, 2017.

 28. W. Nasri, R. Djebali, S. Dhaoui, S. Abboudi and H. Kharroubi; Finite Elements Multiphysics Investigation of Thermoelectric Systems for Electricity and Cooling Generation; International Journal of Modern Studies in Mechanical Engineering, Vol. 3, n.4, pp. 1-13, 2017. doi: 10.20431/2454-9711.0304001

27. R. Djebali, A. Hleli, A. Lamari and M.A. Abbassi; Optimization study on the operating conditions to improve the quality of surfaces coating obtained by plasma spraying process; Journal of thermal Engineering, Vol. 3, n.4, pp. 1411-1418 , 2017. 

26. R. Djebali;  A confrontation of three design techniques' results for optimizing plasma spraying operating conditions toward deposit requirements: Lattice Boltzmann, Finite Difference and Taguchi experimental design; International Journal of Energy Optimization and Engineering (IJEOE), Vol. 6, n.4, pp 16-35, 2017.

2016 

22.  R. Djebali, Mohammed ElGanaoui, Abdallah Jaouabi, Bernard Pateyron; Scrutiny of spray jet and impact characteristics under dispersion effects of powder injection parameters in APS process; International Journal of Thermal Sciences, vol. 100, pp. 229-239, 2016.

2015 

21. R. Djebali , B. Pateyron and  M. El Ganaoui;  Scrutiny of plasma spraying complexities with case study on the optimized conditions toward coating process control; Case Studies in Thermal Engineering , vol. 6, pp. 171-181, 2015.

20. H. Moumni, H. Welhezi, R. Djebali and E. Sediki; Accurate Finite Volume Investigation of Nanofluid Mixed Convection in Two-sided Lid Driven Cavity Including Discrete Heat Sources; Applied Mathematical Modelling, vol. 39, n. 14, pp. 4164–4179, 2015.

2014  

19. R. Djebali; Comments on "Lattice Boltzmann Analysis of 2-D Natural Convection Flow and Heat Transfer within Square Enclosure including an Isothermal Hot Block, by Naffouti, Zinoubi and Ben Maad"; CFD Letters,vol.6, n. 3, pp. 126-130, 2014.

18. M. Toujani, R. Djebali, L. Hassini, S. Azzouz and A. Belghith; Hydro-thermo-viscoelastic Based Finite Element Modeling of Apple Convective Drying Process, Computer Modeling in Engineering & Sciences, vol. 98, No. 4, pp. 469-485, 2014.

17. R. Djebali; Investigating Plasma-Jets Behavior using Axisymmetric Lattice Boltzmann Model under Temperature Dependent Viscosity; Communications in Computational Physics, vol. 15(3),  pp. 677-691, 2014.

2013

16. R. Djebali  and B. Mondal; Comments on "A generalized lattice Boltzmann method for three-dimensional incompressible fluid flow simulation, by Rahmati and Ashrafizaadeh"; CFD Letters, vol. 5, n. 4, pp. 193-196, 2013.

15. R. Djebali, M. Toujani and B. Pateyron ; Taguching the Atmospheric Plasma Spraying Process: Influence of Processing Factors on Droplet Impact Properties Obtained on Dense ZrO₂ and H₂Ar75% Plasma Gas; Computers, Materials & Continua, vol. 37, n. 3, pp. 147-160, 2013.

14. R. Djebali, B. Pateyron and M. El Ganaoui; A Lattice Boltzmann Based Investigation of Powder In-flight Characteristics during APS Process, Part II: Effects of Parameter Dispersions at Powder Injection; Surface & Coatings Technology, vol. 220, pp.157-163, 2013.

2012

13.  R. Djebali; B. Pateyron and M. El Ganaoui; Prandtl Number Signature on Flow Patterns of Electrically Conducting Fluid in Square Enclosure; Computer Modeling in Engineering & Sciences, vol. 88, n. 4, pp.293-307, 2012.

12. T. Naffouti and  R. Djebali; Natural Convection Flow and Heat Transfer in Square Enclosure Asymetrically Heated from Below: A Lattice Boltzmann Comprehensive Study; Computer Modeling in Engineering & Sciences, vol. 88, n. 3, pp. 211-228, 2012.

11. R. Djebali,  M. El Ganaoui, B. Pateyron; A Lattice Boltzmann Based Investigation of Powder In-flight Characteristics during APS Process, Part I: Modelling and Validation; Progress in Computational Fluid Dynamics, vol. 12, n. 4, pp. 270-278, 2012.

10. R. Djebali,  M. El Ganaoui, T. Naffouti; A 2D Lattice Boltzmann Full Analysis of MHD Convective Heat Transfer in Saturated Porous Square Enclosure; Computer Modeling in Engineering & Sciences, vol. 84, n. 6, pp.499-527, 2012.

2011

9. R. Djebali, B. Pateyron; M. El Ganaoui; A lattice Boltzmann-Based Study of Plasma Sprayed Particles Behaviours; Computers, Materials & Continua, vol. 25, n. 2, pp. 159-176, 2011.

8. R. Djebali and M. El Ganaoui; Assessment and Computational Improvement of Thermal Lattice Boltzmann Models Based Benchmark Computations; Computer Modeling in Engineering & Sciences, vol. 71, n. 3,, pp. 179-202, 2011.

7.   R. Djebali, M. El Ganaoui, B . Pateyron and H. Sammouda; Simulation and Modeling of Turbulent Plasma Jet Based on Axisymetric LBGK Model; Defect and Diffusion Forum, vols. 312-315, pp 1167-1171, 2011.

2010

6.   R. Djebali, H. Sammouda, M. El Ganaoui; Some Advances in Applications of Lattice Boltzmann Method for Complex Thermal Flows; Adv. Appl. Math. Mech., vol. 2, n. 5, pp. 587-608, 2010.

5. M. El Ganaoui and R. Djebali; Aptitude of a Lattice Boltzmann Method for Evaluating Transitional Thresholds for Low Prandtl Number Flows in Enclosures; Comptes Rendus - Mécanique, vol. 338, n. 2, pp.85-96, 2010.

4. R. Djebali, B. Pateyron, M. El Ganaoui and H. Sammouda; Lattice Boltzmann Computation of Plasma Jet Behaviors: Part II. Argon-Azote Mixture; Int. Rev. Chem. Eng., vol 2. n. 1, pp. 86-94, 2010.

2009

3.  R. Djebali,  B. Pateyron, M. El Ganaoui and H. Sammouda; Axisymmetric High Temperature Jet Behaviors Based on A Lattice Boltzmann Computational Method Part I: Argon Plasma; Int. Rev. Chem. Eng., vol.  1.  n.  5, pp. 428-438, 2009.

2.  R. Djebali, M. El Ganaoui and H. Sammouda; Investigation of a side wall heated cavity by using lattice Boltzmann method; European Journal of Computational Mechanics,  vol.  18.  n.  2, pp. 217-238, 2009.

1. R. Djebali,  M. El Ganaoui, H. Sammouda and R. Bennacer; Some Benchmarks of a Side Wall Heated Cavity Using Lattice Boltzmann Approach; Fluid dynamics & Materials Processing  , vol. 5, n. 3, pp. 261-282, 2009.

Books & Chapters
    R. Djebali (2012): "Méthode de Boltzmann pour les écoulements et les transferts: Concept, implémentation et applications aux écoulements dans les enceintes et aux jets plasma turbulents". Presses Académiques Francophones, 172 pages.
   R. Djebali; Lattice Boltzmann Method for the Simulation of Flows and Transfers at Very High-Temperature: A Dynamic Framework of Conversion to Physical Space with Test Cases; Springer Book "Thermo-Mechanics Applications and Engineering Technology" Chapter 7, pp 1-19, 2017. (indexé sous Scopus & ISI Web of Science).
    R. Djebali, Rudiments d'acoustique linéaire, soumis au Centre de Publication Universitaire (103 pages).

Conference papers

1.R. Djebali, M. El Ganaoui, H. Sammouda and B. Pateyron; Simulation de la convection naturelle par la méthode de Boltzmann sur réseau; JTET (Bizerte-Tunisie) 2009
2.R. Djebali, M. Pateyron, H. Sammouda and M. EL Ganaoui; Atmospheric axisymetric plasma jet simulation based based on lattice Boltmann method; JITH (Jerba-Tunisia) 2009
3.Djebali, M. EL Ganaoui, H. Sammouda et B. Pateyron; Un schéma accéléré de la méthode de Boltzmann pour la simulation d'une compétition flottaison-entrainnement; CM (Marrakech-Maroc) 2009
4.R. Djebali, M. El Ganaoui, H. Sammouda, B. Pateyron and A. Belghuith; Simulation of jet-flows by using a lattice Boltzmann algorithm; ICCHMT (Guangzhou, China) 2009.
5.R. Djebali, N. Calvé, B. Pateyron, M. El Ganaoui;Les méthodes de résolution de type "Lattice Boltzmann" sont-elles utilisables pour simuler les jets plasmas soufflés atmosphériques utilisés en projection?; Plasmas Froids, (Bonascre-France) 2009.
6.R. Djebali, B. Pateyron, M. El Ganaoui and H. Sammouda; Lattice Boltzmann Computation of Plasma Jet Behaviors : Part II. Argon-Azote Mixture; (CEAM) Virtual forum (Naples) 2009.
7.R. Djebali, B. Pateyron, M. El Ganaoui, H. Sammouda; An axisymmetric BGK-LES framework for simulation and modeling of turbulent plasma-jets; GD (Greifswald Germany) 2010
8.R. Djebali, M. El Ganaoui, H. Sammouda and B. Pateyron; Simulation of laminar natural convection flows in saturated porous media cavities under uniform magnetic field effects; HEFAT (Antalya, Turkey) 2010.
9.R. Djebali, M. El Ganaoui, H. Sammouda and B. Pateyron; On the effects of Uniform Magnetic Field on Natural Convection in Fluid-Saturated Porous Media Enclosures; ICTEA (Marrakesh, Morocco) 2010.
10.R. Djebali, B. Pateyron, M. El Ganaoui, H. Sammouda; Un modèle thermique couplé LBGK-LES pour la simulation de jets plasma: application au mélange argon-azote; SFT (Le Touquet France) 2010.
11.R. Djebali, M. El Ganaoui, B. Pateyron and H. Sammouda;Simulation of thermal axisymetric plasma-jets based on LBGK-LES turbulent model; AMT (Settat, Maroc ) 2010
12.R. Djebali, N. Calvé, B. Pateyron, M. El Ganaoui,H. Sammouda; Les méthodes de résolution de type « Lattice Boltzmann » sont-elles utilisables pour simuler les jets plasmas soufflés atmosphériques utilisés en projection?; CIFEM, (Saly, Sinégal) 2010.
13.R. Djebali, M. El Ganaoui, B. Pateyron and H. Sammouda; Simulation and Modeling of Turbulent Plasma Jet Based on Axisymetric LBGK Model; DSL (Paris-France) 2010.
14.R. Djebali, H. Sammouda, M. El Ganaoui and B. Pateyron; Simulation du comportement dynamique en projection plasma par la méthode de Boltzmann sur réseau; JTET (Tozeur-Tunisie) 2011.
15.R. Djebali, M. El Ganaoui, B. Pateyron and H. Sammouda; Étude des phénomènes de transferts plasma -particules par la méthode de boltzmann sur réseau; CM (Oujda-Maroc) 2011.
16.R. Djebali, M. El Ganaoui, B. Pateyron and H. Sammouda; lattice boltzmann study of transfer phenomena and transport of flying particles in d.c. plasma spraying; ICCHMT (Istanbul-Turkey) 2011.
17.R. Djebali, H. Sammouda, M. El Ganaoui and B. Pateyron, Etude du comortement en projection plasma par la méthode de Boltzmann sur réseau, JITH (Tlemcen-Algérie) 2011.
18.R. Djebali, M. El Ganaoui, B. Pateyron and H. Sammouda; Lattice Boltzmann study of transfer phenomena and transport of in-flight particles in d.c plasma spraying; NASCASE11 (Settat-Maroc) 2011.
19.R. Djebali, M. El Ganaoui, B. Pateyron and H. Sammouda; Etude du comportement en projection plasma de particules d'Alumine par la méthode de Boltzmann sur réseau; SFGP (Lille-Grand palis- France) 2011.
20.R. Djebali, B. Pateyron, M. El Ganaoui and H. Sammouda; Les méthodes de résolution de type «Lattice Boltzmann» sont-elles utilisables pour simuler les jets plasmas soufflés atmosphériques utilisés en projection thermique? SFT2011 (Perpignan-France) 2011.
21.R. Djebali, N. Calvé, B. Pateyron & M. ElGanaoui; Quelles utilisations des méthodes de résolution de type « Lattice Boltzmann » dans la simulation des jets plasmas soufflés atmosphériques?; 10ème Colloque sur les arcs électriques CAEX; Centre Européen de la Céramique, (Limoges) 2011.
22.K. Lahmer, R. Bessaih, A. Scipioni, M. ElGanaoui and R. Djebali, SFT (Gérardmer- France) Mai, 28-31, 2013.
23.R. Djebali, B. Pateyron and M. El Ganaoui; 7th IREC Int. Renewable Energy Conference (Hammamet, Tunisia) March 22 - 24, 2016.
24.R. Djebali, A. Hleli and M.A. Abbassi; ICAS 2016, Istanbul, Turkey, 31 August - 2 Sptember 2016.
25.M.A. Abbassi, R. Djebali, A. Omri; ICAS 2016, Istanbul, Turkey, 31 August - 2 Sptember 2016.
26.Ridha Djebali, M. El Ganaoui, W. Nasri, and M.A. Abbassi; A multiphysics simulation of thermoelectric systems for electricity and cooling generation, CIMATEN2016, Sousse, Tunisia 17-19 December 2016.
27.R. Djebali, M.A. Abbassi and M. El Ganaoui; Powerfulness of SRT-BGK LB thermal models to evaluate transitional thresholds in low Prandtl number flows; LBM Springer School with OpenLB software Lab; (Hammamet, Tunisia) March 6-10/2017.
28.R. Djebali, W. Nasri, K. Moueddeb and S. Abboudi, Thermoelectric modules as a sustainable solution for refrigeration and electricity generation. Proceeding of the 2nd conference Scientific Days of Medjerda (SDMed2017), 25-27 October 2017, ESIER Medjez el Bab, Tunisia.
 2021' 29. 29. Mohamed Ammar Abbassi, Bouchmel Mliki, Mokhtar Ferhi and Ridha Djebali. Enhancement and control of nanoliquid MHD natural convection in an enclosure containing a hot triangular block, ICMMES, July 12-16, Hammamet - Tunisia
30.Mokhtar Ferhi, Ridha Djebali, Bouchmel Mliki and Mohamed Ammar Abbassi. Mesoscopic Study of fluid flow and heat transfer in a linearely heated micro-heat exchanger, ICMMES, July 12-16, Hammamet - Tunisia
31.Ridha Djebali, Mokhtar Ferhi, Bouchmel Mliki and Mohamed Ammar Abbassi. Are SRT-BGK models still usable versus emerging models? An augmented model applied to nanoliquids, ICMMES, July 12-16, Hammamet - Tunisia
32.Mokhtar Ferhi, Appraising heat transfer and entropy generation of cu-water nanofluid in a partially heated microchannel, CIMatEn, Nov. 5-7, 2021, Sousse, Tunisia
33.Ridha Djebali and Mokhtar Ferhi, Irreversibility analysis and heat transfer of mhd ecofreindly nanofluid in l-shaped heat exchanger, CIMatEn, Nov. 5-7, 2021, Sousse, Tunisia
 2022'34. Ridha Djebali and Mokhtar Ferhi, DOE of heat transfer and entropy generation in channel micro micro-heat exchanger driven by a coflow. International Conference on Energy and Material Sciences (EMS'2022) November 16-17, 2022 Skikda-Algeria.
35.Ridha Djebali and Mokhtar Ferhi, Appraising of heat transfer enhancement and entropy generation minimization in a micro tall cavity under magnetic field and sinusoidal heating. The 13th International Renewable Energy Congress, December, 13-15, 2022 Hammamet -Tunisia.
36.Mokhtar Ferhi, Ridha Djebali, Heat transfer and entropy generation in a micro-heat exchanger induced by wall injection. The 13th International Renewable Energy Congress, December, 13-15, 2022 Hammamet -Tunisia.
 2023'37. R. Djebali, M. Ferhi and D. Khilifi, "Computational and DOE Assessment of Heat Transfer and Thermodynamic Second Law in Closed Medium with Internal Fan," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389292.
38.M. Ferhi, D. Khilifi and R. Djebali, "Micro Scale Modeling of Heat Transfer and Entropy Generation in a Partially Porous Channel Using Lattice Boltzmann Method and Design of Experiments," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-5, doi: 10.1109/IREC59750.2023.10389319.
39.M. Ferhi, D. Khilifi and R. Djebali, "Heat Transfer and Irreversibility Response Due to Natural Convection in a Micro Partially Porous Cavity: Micro-Electronic Cooling Application," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389492.
40.R. Djebali, D. Khilifi and M. Ferhi, "Design of Experiments Investigation of Synthetic Jets Cooling Efficiency," 2023 14th International Renewable Energy Congress (IREC), Sousse, Tunisia, 2023, pp. 1-6, doi: 10.1109/IREC59750.2023.10389495.
41.Wiem Nasri, R. Djebali, A.J Chamkha, Abderazak Bezazi, F. Mechighel, P. Reis, Zied Driss; Mocroscale modeling of Aramid fiber reinforcement in advanced non-crystalline Aerogel composites: Design and Modeling of Mechanical Systems CMSM'2023.
 2024'42 44. Ridha Djebali, Mokhtar Ferhi, Karim Khemiri, Montassar Najari, Bernard Pateyron, Ridha Ennetta; ANN Analysis of Particle and Droplet Dynamics and Heat Transfer in a 12kK Axisymmetric Turbulent Ar-H2 Plasma Jet During Atmospheric Spraying.The 4th Renewable & Sustainable Energies and Green Processes: December 22, 23 and 24, 2024 in Sousse, Tunisia.
43.Karim Khémiri, Marwen Bjaoui, Ridha Djebali, Anis Sellami, Implementing a reliable control system for a two-stage AC water pumping system with a reduced number of sensors.The 4th Renewable & Sustainable Energies and Green Processes: December 22, 23 and 24, 2024 in Sousse, Tunisia.
44.Mokhtar Ferhi, Ridha Djebali, Optimization of Heating Micro-Electro-Mechanical System Design for Enhanced Heat Transfer and Reduced Entropy Generation using Response Surface Methodology. The 4th Renewable & Sustainable Energies and Green Processes: December 22, 23 and 24, 2024 in Sousse, Tunisia.
45.Mokhtar Ferhi, Ridha Djebali; Lattice Boltzmann investigation of efficiency in micro-channel cooled by jets flow. 20ième «International Conference for Mesoscopic Methods in Engineering and Science» tenu à Hammamet-Tunisie du 24 au 28 Juin 2024.
 2025'46 Ridha Djebali, M. Ferhi, F. Mechighel, K. Khemiri, M. Bjaoui, M. Ouerhani, M. Najari, C. Amri, R. Enneta; Deep Learning Analysis and Numerical Simulation of Exergy and Nanofluid Heat Transfer Efficiency in a Two-Compartment Heat Exchanger with Internal Heat Generation and Baffles. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
47.Ridha Djebali, M. Ferhi, K. Khemiri, F. Mechighel, B. Pateyron, M. Ouerhani, M. Najari, C. Amri, R. Enneta; Integration of Artificial Neural Networks and Process Simulation for Optimizing Direct Current Atmospheric Plasma Spraying of Enhanced Zirconia Coatings. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
48.Karim Khémiri, Marwen Bjaoui, Montassar Najari, Mokhtar Ferhi, Ridha Djebali; Enhancing State of Charge Estimation for Lithium-Ion Batteries in Noisy Environments Using a Hybrid LSTM-EKF Model. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
49.Mokhtar Ferhi, Karim Khemiri, Montassar Najari, Ridha Djebali; Design of experiments of heat transfer phenomena and entropy generation for thermal management of multiple electronic components. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
50.Asma Memni, Mokhtar Ferhi, Ridha Djebali, Karim Khemiri, Montassar Najjar; Fluid-structure interaction over a backward-facing step equipped with an elastic baffle. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
51.Mokhtar Ferhi, Karim Khemiri, Montassar Najjari, Ridha Djebali; Heatline visualization and entropy analysis of MHD conjugate heat transfer in a partitioned medium filled with (15%Ag-85%MgO)/H2Onanofluid: A Lattice Boltzmann investigation. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
52.Marwen Bjaoui, Karim Khemiri, Lotfi Khemissi, Ridha Djebali, A. Sellami; Optimized energy management strategy for non-autonomous microgrids using Crow Search Optimization. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
53.Karim Khémiri, Marwen Bjaoui, Montassar Najari, Mokhtar Ferhi, Ridha Djebali; Analyzing Series Resistance Effects on PV Characteristics and Estimation Using LSTM-EKF. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia
54.Fatiha Chebli, Farid Mechighel, Ridha Djebali; Numerical investigation of the effect of storage tank orientation on the melting of phase change material in a square-shaped tank. 15th International Renewable Energy Congress (IREC), 2-4 Febrery, 2025, Hammamet, Tunisia.